Medical Heat Sealer
MY100-C
uFEATURES
ü7" touch screen with graphics operation interfaces for easy operation, parameter settings and record saving. |
üMicrocomputer temperature control ensures temperature differential less than 1% and the work temperature can be adjusted from 60 – 220°C. |
üFast preheating design allows 40s to reach 180°C from room temperature. |
üCooling system to reduce cooling time when switching from high temperature mode to low temperature mode. |
üAdvanced panel heater is with high temperature endurance, long life span and high heating efficiency. |
üSafety design stops the device when temperature differential is found. |
üAdvanced panel heater is with high temperature endurance, long life span and high heating efficiency. |
üAutomatic economy standby mode. Standby wait time and temperature can be adjusted. |
üTest mode to carry out sealing test and print sterilization time, temperature, sealing speed, pressure, time, operator, serial number and all relative parameters for documentation and inspection. |
uPRINTING SYSTEM |
üBuild-in printer, items to be printed and the texts can be adjusted |
üSterilization time, expiration time, sterilization batch number, sterilizer number, operator, name of articles, department name and other information can be printed on the pouch. |
üPrinting can be enabled/disabled. |
uTECHNICAL PARAMETERS
Control System | 7" touch screen |
Cutting Length | ≥50mm |
Cutting Speed | 12±0.5m/min |
Cutting Differential | ≤1% |
Sealing Speed | 10±0.5m/min |
Sealing Interval Width | 0 – 35mm adjustable |
Sealing Beam Width | 12mm |
Work Temperature | 60 – 220°C |
Sealing Pressure | 85±30N |
Temperature Differential | ≤1% |
Power Supply | AC 220V ± 10%, 50Hz |